Gear4 Direct Ltd Carb Upgrades

[ Home ] [ Up ] [ Catalog ] [ Terms & Conds ] [ Search ] [ View Basket ] [ Checkout ] [ Contact Us ] [ Login ]

Browsing The Store > Engine Parts > Carb Upgrades

	DEEP SUMP IN GOLD FOR ALL KEIHIN CARBS Ref: PEDSIG DEEP SUMP - A straight forward replacement of the Keihin FCR Carburetor drain plug. The Extra Capacity allows a much improved fuel flow through the main jet. The filter elements in the base traps any water and dirt which has contaminated the fuel. Deep Sump has been extensively tested by MX world champion Dave Thorpe who uses and really rates the product. Maintenance: It is advisable to clean the DEEP SUMP Filter after every 1-2 hours of riding. Depending on conditions- if it is very dusty or wet and muddy then its worth checking after every race, similar to air filter changes. Image of red version. Price: £35.74 (Including VAT )
	Quantity:

	V FORCE3 REED VALVE 50 SX Ref: V351A V-Force reed valves are used by many Factory teams. Using the reed valves gives you more efficiency, with instant throttle response, horsepower gains and wider peak power. The latest reedvalve is the V-Force3 reed valve system. The Moto T assinari VForce3 reed valve system is the number one choice of the Factory teams. Currently more Factory race teams depend on our reed valve technology than all the other brands combined. Please note: Owners of 250/300 EXC's will need to ensure they have the SX carb boot in place prior to fitting. Call 01778 380380 for clarification. Price: £124.98 (Including VAT )
	Quantity:

	V FORCE3 REED VALVE 65 SX Ref: V351B V-Force reed valves are used by many Factory teams. Using the reed valves gives you more efficiency, with instant throttle response, horsepower gains and wider peak power. The latest reedvalve is the V-Force3 reed valve system. The Moto T assinari VForce3 reed valve system is the number one choice of the Factory teams. Currently more Factory race teams depend on our reed valve technology than all the other brands combined. Please note: Owners of 250/300 EXC's will need to ensure they have the SX carb boot in place prior to fitting. Call 01778 380380 for clarification. Price: £124.98 (Including VAT )
	Quantity:

	V FORCE3 REED VALVE 85 SX Ref: V385A V-Force reed valves are used by many Factory teams. Using the reed valves gives you more efficiency, with instant throttle response, horsepower gains and wider peak power. The latest reedvalve is the V-Force3 reed valve system. The Moto T assinari VForce3 reed valve system is the number one choice of the Factory teams. Currently more Factory race teams depend on our reed valve technology than all the other brands combined. Please note: Owners of 250/300 EXC's will need to ensure they have the SX carb boot in place prior to fitting. Call 01778 380380 for clarification. Price: £124.98 (Including VAT )
	Quantity:

	V FORCE3 REED VALVE 125SX/EXC Ref: V306A-H V-Force reed valves are used by many Factory teams. Using the reed valves gives you more efficiency, with instant throttle response, horsepower gains and wider peak power. The latest reedvalve is the V-Force3 reed valve system. The Moto T assinari VForce3 reed valve system is the number one choice of the Factory teams. Currently more Factory race teams depend on our reed valve technology than all the other brands combined. Please note: Owners of 250/300 EXC's will need to ensure they have the SX carb boot in place prior to fitting. Call 01778 380380 for clarification. Price: £124.98 (Including VAT )
	Quantity:

	V FORCE3 REED VALVE 200 SX/EXC 250 SX-02 250/300 EXC-03 Ref: V306A-M V-Force reed valves are used by many Factory teams. Using the reed valves gives you more efficiency, with instant throttle response, horsepower gains and wider peak power. The latest reedvalve is the V-Force3 reed valve system. The Moto T assinari VForce3 reed valve system is the number one choice of the Factory teams. Currently more Factory race teams depend on our reed valve technology than all the other brands combined. Please note: Owners of 250/300 EXC's will need to ensure they have the SX carb boot in place prior to fitting. Call 01778 380380 for clarification. Price: £124.98 (Including VAT )
	Quantity:

	V FORCE3 REED VALVE 250 SX 03-06 250/300 EXC 04-06 Ref: V316A-H V-Force reed valves are used by many Factory teams. Using the reed valves gives you more efficiency, with instant throttle response, horsepower gains and wider peak power. The latest reedvalve is the V-Force3 reed valve system. The Moto T assinari VForce3 reed valve system is the number one choice of the Factory teams. Currently more Factory race teams depend on our reed valve technology than all the other brands combined. Please note: Owners of 250/300 EXC's will need to ensure they have the SX carb boot in place prior to fitting. Call 01778 380380 for clarification. Price: £124.98 (Including VAT )
	Quantity:

	POWERBLADE KTM 50 21MM DELORTO Ref: HCRPB13 The 'PowerBlade' fits into the inlet side of the carb, splitting the venturi. The purpose of the blade is to smooth the air as it passes the throttle slide, allowing the air/fuel charge to enter the cylinder at a higher velocity, thus resulting in upto 10% more horsepower. Primary power benefits are idle to mid range on 2 - strokes and power from idle to full throttle on 4 - strokes. This performance product has to be one of the most cost effective ways of boosting your bikes power, with no adverse effect, the power just comes in smooth and strong form low to mid range. Price: £29.67 (Including VAT )
	Quantity:

	POWERBLADE SX65 98-08 / KX65 98-05 Ref: HCRPB10 The 'PowerBlade' fits into the inlet side of the carb, splitting the venturi. The purpose of the blade is to smooth the air as it passes the throttle slide, allowing the air/fuel charge to enter the cylinder at a higher velocity, thus resulting in upto 10% more horsepower. Primary power benefits are idle to mid range on 2 - strokes and power from idle to full throttle on 4 - strokes. This performance product has to be one of the most cost effective ways of boosting your bikes power, with no adverse effect, the power just comes in smooth and strong form low to mid range. Price: £35.02 (Including VAT )
	Quantity:

	POWERBLADE KTM 125 SX Ref: HCRPB02 The 'PowerBlade' fits into the inlet side of the carb, splitting the venturi. The purpose of the blade is to smooth the air as it passes the throttle slide, allowing the air/fuel charge to enter the cylinder at a higher velocity, thus resulting in upto 10% more horsepower. Primary power benefits are idle to mid range on 2 - strokes and power from idle to full throttle on 4 - strokes. This performance product has to be one of the most cost effective ways of boosting your bikes power, with no adverse effect, the power just comes in smooth and strong form low to mid range. Price: £58.99 (Including VAT )
	Quantity:

	POWERBLADE KTM SX 250F/ 525 EXC 06 Ref: HCRPB17 The 'PowerBlade' fits into the inlet side of the carb, splitting the venturi. The purpose of the blade is to smooth the air as it passes the throttle slide, allowing the air/fuel charge to enter the cylinder at a higher velocity, thus resulting in upto 10% more horsepower. Primary power benefits are idle to mid range on 2 - strokes and power from idle to full throttle on 4 - strokes. This performance product has to be one of the most cost effective ways of boosting your bikes power, with no adverse effect, the power just comes in smooth and strong form low to mid range. Price: £48.99 (Including VAT )
	Quantity:

	POWERBLADE 250SXF AIR INTAKE Ref: HCRPB17F The 'PowerBlade' fits into the inlet side of the carb, splitting the venturi. The purpose of the blade is to smooth the air as it passes the throttle slide, allowing the air/fuel charge to enter the cylinder at a higher velocity, thus resulting in upto 10% more horsepower. Primary power benefits are idle to mid range on 2 - strokes and power from idle to full throttle on 4 - strokes. This performance product has to be one of the most cost effective ways of boosting your bikes power, with no adverse effect, the power just comes in smooth and strong form low to mid range. Price: £48.99 (Including VAT )
	Quantity:

	POWERBLADE KTM 250/300 04-05 EXC 36MM Ref: HCRPB12 The 'PowerBlade' fits into the inlet side of the carb, splitting the venturi. The purpose of the blade is to smooth the air as it passes the throttle slide, allowing the air/fuel charge to enter the cylinder at a higher velocity, thus resulting in upto 10% more horsepower. Primary power benefits are idle to mid range on 2 - strokes and power from idle to full throttle on 4 - strokes. This performance product has to be one of the most cost effective ways of boosting your bikes power, with no adverse effect, the power just comes in smooth and strong form low to mid range. Price: £58.99 (Including VAT )
	Quantity:

	POWERBLADE KTM 400/450/520/525 EXC SX-05 Ref: HCRPB07 The 'PowerBlade' fits into the inlet side of the carb, splitting the venturi. The purpose of the blade is to smooth the air as it passes the throttle slide, allowing the air/fuel charge to enter the cylinder at a higher velocity, thus resulting in upto 10% more horsepower. Primary power benefits are idle to mid range on 2 - strokes and power from idle to full throttle on 4 - strokes. This performance product has to be one of the most cost effective ways of boosting your bikes power, with no adverse effect, the power just comes in smooth and strong form low to mid range. Price: £69.99 (Including VAT )
	Quantity:

	POWERBLADE KTM SX 450/525 06 Ref: HCRPB18 The 'PowerBlade' fits into the inlet side of the carb, splitting the venturi. The purpose of the blade is to smooth the air as it passes the throttle slide, allowing the air/fuel charge to enter the cylinder at a higher velocity, thus resulting in upto 10% more horsepower. Primary power benefits are idle to mid range on 2 - strokes and power from idle to full throttle on 4 - strokes. This performance product has to be one of the most cost effective ways of boosting your bikes power, with no adverse effect, the power just comes in smooth and strong form low to mid range. Price: £48.99 (Including VAT )
	Quantity:

	POWERBLADE RMZ450 Ref: HCRPB16 The 'PowerBlade' fits into the inlet side of the carb, splitting the venturi. The purpose of the blade is to smooth the air as it passes the throttle slide, allowing the air/fuel charge to enter the cylinder at a higher velocity, thus resulting in upto 10% more horsepower. Primary power benefits are idle to mid range on 2 - strokes and power from idle to full throttle on 4 - strokes. This performance product has to be one of the most cost effective ways of boosting your bikes power, with no adverse effect, the power just comes in smooth and strong form low to mid range. Price: £48.99 (Including VAT )
	Quantity:

	POWERBLADE RM/KX/YZ/CR125 Ref: HCRPB01 The 'PowerBlade' fits into the inlet side of the carb, splitting the venturi. The purpose of the blade is to smooth the air as it passes the throttle slide, allowing the air/fuel charge to enter the cylinder at a higher velocity, thus resulting in upto 10% more horsepower. Primary power benefits are idle to mid range on 2 - strokes and power from idle to full throttle on 4 - strokes. This performance product has to be one of the most cost effective ways of boosting your bikes power, with no adverse effect, the power just comes in smooth and strong form low to mid range. Price: £58.99 (Including VAT )
	Quantity:

	POWERBLADE YZ/KX/RM/KTM 125/250 EXC Ref: HCRPB03 The 'PowerBlade' fits into the inlet side of the carb, splitting the venturi. The purpose of the blade is to smooth the air as it passes the throttle slide, allowing the air/fuel charge to enter the cylinder at a higher velocity, thus resulting in upto 10% more horsepower. Primary power benefits are idle to mid range on 2 - strokes and power from idle to full throttle on 4 - strokes. This performance product has to be one of the most cost effective ways of boosting your bikes power, with no adverse effect, the power just comes in smooth and strong form low to mid range. Price: £58.99 (Including VAT )
	Quantity:

	POWERBLADE 07YZF/KXF250 YZF/YZM450 Ref: HCRPB2-06 The 'PowerBlade' fits into the inlet side of the carb, splitting the venturi. The purpose of the blade is to smooth the air as it passes the throttle slide, allowing the air/fuel charge to enter the cylinder at a higher velocity, thus resulting in upto 10% more horsepower. Primary power benefits are idle to mid range on 2 - strokes and power from idle to full throttle on 4 - strokes. This performance product has to be one of the most cost effective ways of boosting your bikes power, with no adverse effect, the power just comes in smooth and strong form low to mid range. Price: £48.99 (Including VAT )
	Quantity:

	POWERBLADE YZF250/450 Ref: HCRPB06 The 'PowerBlade' fits into the inlet side of the carb, splitting the venturi. The purpose of the blade is to smooth the air as it passes the throttle slide, allowing the air/fuel charge to enter the cylinder at a higher velocity, thus resulting in upto 10% more horsepower. Primary power benefits are idle to mid range on 2 - strokes and power from idle to full throttle on 4 - strokes. This performance product has to be one of the most cost effective ways of boosting your bikes power, with no adverse effect, the power just comes in smooth and strong form low to mid range. Price: £48.99 (Including VAT )
	Quantity:

	POWERBLADE CR80 93-04/RM85 97-05 Ref: HCRPB08 The 'PowerBlade' fits into the inlet side of the carb, splitting the venturi. The purpose of the blade is to smooth the air as it passes the throttle slide, allowing the air/fuel charge to enter the cylinder at a higher velocity, thus resulting in upto 10% more horsepower. Primary power benefits are idle to mid range on 2 - strokes and power from idle to full throttle on 4 - strokes. This performance product has to be one of the most cost effective ways of boosting your bikes power, with no adverse effect, the power just comes in smooth and strong form low to mid range. Price: £69.99 (Including VAT )
	Quantity:

	POWERBLADE CR250 HQA125/250 Ref: HCRPB04 The 'PowerBlade' fits into the inlet side of the carb, splitting the venturi. The purpose of the blade is to smooth the air as it passes the throttle slide, allowing the air/fuel charge to enter the cylinder at a higher velocity, thus resulting in upto 10% more horsepower. Primary power benefits are idle to mid range on 2 - strokes and power from idle to full throttle on 4 - strokes. This performance product has to be one of the most cost effective ways of boosting your bikes power, with no adverse effect, the power just comes in smooth and strong form low to mid range. Price: £58.99 (Including VAT )
	Quantity:

	POWERBLADE CRF 250 04-06 Ref: HCRPB11 The 'PowerBlade' fits into the inlet side of the carb, splitting the venturi. The purpose of the blade is to smooth the air as it passes the throttle slide, allowing the air/fuel charge to enter the cylinder at a higher velocity, thus resulting in upto 10% more horsepower. Primary power benefits are idle to mid range on 2 - strokes and power from idle to full throttle on 4 - strokes. This performance product has to be one of the most cost effective ways of boosting your bikes power, with no adverse effect, the power just comes in smooth and strong form low to mid range. Price: £35.02 (Including VAT )
	Quantity:

	POWERBLADE 07 CRF 250 CRF/RMZ/ KXF 450 ALL KTM 4T Ref: HCRPB2-11 The 'PowerBlade' fits into the inlet side of the carb, splitting the venturi. The purpose of the blade is to smooth the air as it passes the throttle slide, allowing the air/fuel charge to enter the cylinder at a higher velocity, thus resulting in upto 10% more horsepower. Primary power benefits are idle to mid range on 2 - strokes and power from idle to full throttle on 4 - strokes. This performance product has to be one of the most cost effective ways of boosting your bikes power, with no adverse effect, the power just comes in smooth and strong form low to mid range. Price: £48.99 (Including VAT )
	Quantity:

	POWERBLADE CRF450 Ref: HCRPB05 The 'PowerBlade' fits into the inlet side of the carb, splitting the venturi. The purpose of the blade is to smooth the air as it passes the throttle slide, allowing the air/fuel charge to enter the cylinder at a higher velocity, thus resulting in upto 10% more horsepower. Primary power benefits are idle to mid range on 2 - strokes and power from idle to full throttle on 4 - strokes. This performance product has to be one of the most cost effective ways of boosting your bikes power, with no adverse effect, the power just comes in smooth and strong form low to mid range. Price: £58.99 (Including VAT )
	Quantity:

	POWERBLADE KX/YZ/SX/CR85 05 Ref: HCRPB09 The 'PowerBlade' fits into the inlet side of the carb, splitting the venturi. The purpose of the blade is to smooth the air as it passes the throttle slide, allowing the air/fuel charge to enter the cylinder at a higher velocity, thus resulting in upto 10% more horsepower. Primary power benefits are idle to mid range on 2 - strokes and power from idle to full throttle on 4 - strokes. This performance product has to be one of the most cost effective ways of boosting your bikes power, with no adverse effect, the power just comes in smooth and strong form low to mid range. Price: £38.99 (Including VAT )
	Quantity:

	POWERBLADE KXF 250/RMZ 250 Ref: HCRPB06A The 'PowerBlade' fits into the inlet side of the carb, splitting the venturi. The purpose of the blade is to smooth the air as it passes the throttle slide, allowing the air/fuel charge to enter the cylinder at a higher velocity, thus resulting in upto 10% more horsepower. Primary power benefits are idle to mid range on 2 - strokes and power from idle to full throttle on 4 - strokes. This performance product has to be one of the most cost effective ways of boosting your bikes power, with no adverse effect, the power just comes in smooth and strong form low to mid range. Price: £48.99 (Including VAT )
	Quantity:

	POWERBLADE BLASTER & BANSHEE Ref: HCRPB14 The 'PowerBlade' fits into the inlet side of the carb, splitting the venturi. The purpose of the blade is to smooth the air as it passes the throttle slide, allowing the air/fuel charge to enter the cylinder at a higher velocity, thus resulting in upto 10% more horsepower. Primary power benefits are idle to mid range on 2 - strokes and power from idle to full throttle on 4 - strokes. This performance product has to be one of the most cost effective ways of boosting your bikes power, with no adverse effect, the power just comes in smooth and strong form low to mid range. Price: £109.99 (Including VAT )
	Quantity:

	TORQUE TUBE FOR 250 SXF Ref: TORQUETUBE Torque tube designed to increase the overall torque/power throughout the entire rev range of the machine. Price: £39.00 (Including VAT )
	Quantity:

	BOYESEN QUICKSHOT2 PUMP COVER Ref: BYAPC-2 With more than 30 years in High Performance engineering and manufacturing, Boyesen has produced an all new accelerator pump cover to solve the bogging problem associated with 4-stroke Keihin FCR carburetors Eliminates hesitation and bogging Provides instant response to throttle movements Reduces hot engine stalling Improves low end performance Bolt-on product that requires no modification Price: £95.01 (Including VAT )
	Quantity:

	BOYESEN QUICKSHOT3 ADJUSTABLE FUEL PUMP COVER Ref: BYAPC-3 ELIMINATE BOG AND IMPROVE RESPONSE WITH HASSLE FREE LEAK JET CIRCUIT TUNING. Available for all Keihin FCR carbureted MX, Off-road and ATV models. This patented 3rd generation Quickshot combines an innovative triple effect to; completely fill the pump chamber with fuel, eliminate all trapped air from the system and provide and adjustable leak jet circuit for quick hand tuning. Together with with the Boyesen unconditional guarantee, the QS3 simply delivers unmatched results. • Tunable leak jet circuit maximizes volume of fuel and duration of fuel spray for any condition • Investment cast and finished to precise tolerances • Stops hesitation and bog • Instant throttle response • Improves low end performance • Fits ALL Keihin FCR carbs • Simple bolt-on "THE ULTIMATE IN ADJUSTABLE FUEL INJECTION" Price: £107.27 (Including VAT )
	Quantity:

	FREE FLO FOUR STROKE BLACK CARB HOSE Ref: C884591 Price: £8.15 (Including VAT )
	Quantity:

	FREE FLO FOUR STROKE ORANGE CARB HOSE Ref: C884599 Price: £8.15 (Including VAT )
	Quantity:

	FREE FLO FOUR STROKE BLUE CARB HOSE Ref: C884597 Price: £8.15 (Including VAT )
	Quantity:

	FREE FLO TWO STROKE BLACK CARB HOSE Ref: C88491 Price: £8.15 (Including VAT )
	Quantity:

	FREE FLO TWO STROKE BLUE CARB HOSE Ref: C88497 Price: £8.15 (Including VAT )
	Quantity:

	FREE FLO TWO STROKE ORANGE CARB HOSE Ref: C88499 Price: £8.15 (Including VAT )
	Quantity:

Browsing The Store > Engine Parts > Carb Upgrades

Best Sellers:

"LESS THAN HALF PRICE" KTM 2010 CORE MX JERSEY, PANTS & GLOVES DEAL (Ref: COREKITDEAL)

KTM STICKER SHEET (Ref: 3B67100)

KTM COFFEE MUG ORANGE (Ref: 3B57110)

KTM KIDS PUSH ALONG SCOOTER (Ref: 3PW097300)

ALL SOLD KTM RACING BLACK HOODED LARGE (Ref: 3PW105444)

KTM CHAIN SLIDER KIT (wrap around) (Ref: 50304066110)

LESS THAN HALF PRICE KTM BLK/OR R2R HELMET L/60 (Ref: 3B71914)

FOX 2010 POLARPAW INSULATED GLOVE BLACK SIZE L/10 (Ref: 03157-001-017)

KINI RED BULL 2010 COMP MX HELMET XS/54 (Ref: 3L4090071)

KTM BRANDED GRIP SET (Ref: 63002021100)